Spectral Response Measurement System

1.Spectral Response (CEPseries)


The system has been designed to irradiate solar cells with monochromatic light of constant energy and constant photons without wavelength dependence, and measures the spectral response and quantum efficiency of various solar cells.


Our unique real-time light intensity monitor control system constantly monitors irradiation light intensity to keep the light intensity constant, and so it is not affected by the fluctuation of the light source. This is a well-established control system with excellent measurement stability and measurement reproducibility.


The CEP series systems and other systems have been delivered to many customers, including the National Institute of Advanced Industrial Science and Technology (AIST) and Japan Electrical Safety & Environment Technology Laboratories (JET).Our systems have become one of the standard measuring instruments for solar

cell performance evaluation in Japan.


 
CEP-25RR Spectral Response/IQE measurement system

 
  • Spectral response measurement by constant energy irradiation
  • Measurement of quantum efficiency by constant photon irradiation
  • Diffuse reflection measurement and internal quantum efficiency

 

CEP-25ML  Spectral Response Measurement System

 
  • Spectral response maeasurement by constant energy irradiation
  • Measurement of quantum efficiency by constant photon irradiation
  • Solar cell characteristics and I-V characteristics measurement

 
CEP-M1000 Solar Cell Module Spectral Response Measurement System

 
  • Spectral response maeasurement by constant energy irradiation
  • Measurement of quantum efficiency by constant photon irradiation
  • It is possible to measure the spectral sensitivity of a solar cell module with a maximum size of 1.7×1.2×0.1M

 

 

2. Sensor Spectral Response


The systems have been designed to measure spectral responsivity (spectral response) of photoelectric conversion devices (photodetectors/sensors) such as silicon photodiodes and CCD/CMOS image sensors. 

The systems can cover a wide wavelength range with low stray light.

 

VC-250 Sensor Spectral Response Measurement System

 
  • Ideal for evaluating spectral characteristics of photo diodes and CCD/CMOS image sensors 
  • Variable light intensity of monochromatic light up to 3 digits 
  • Elimiting reference measurements with our unique light intensity real-time feedback mechanism  

 

 

3. Spectral Response (SMseries・BQEseries)

The systems measure the intensity of irradiation light at each wavelength as a reference and then automatically measures the spectral response(A/W) and quantum efficiency (EQE/IPCE) based on the light intensity.
 
Two types of the systems are available SM-250 IPCE Measurement System (mW/cm2 monochromatic light irradiation) for organic solar cells.

BQE-100 Spectral Response/Quantum Efficiency Measuremen (monochromatic light irradiation of μW/cm2) for inorganic solar cells.

 

SM-250  IPCE Measurement system

 
  • Ideal for IPCE/QE evalution of organic solar cells(dye-sensitized,organic thin film,perovskite solar cells)
  • Spectral response(A/W) and quantum effciensy(QE) can be measured in the wavelength range of 300 to 1150nm

 

BQE-100C  Spectral Response/Quantum Efficiency Measurement

 
  • Low-cost compact design employing unique optics while maintaining excellent performance
  • Automatic calculation of short-circuit current dinsity(Jsc)