Global site > Solar cell > BS-500BK　Si Photodiode detector

BS-500BK  Si Photodiode detector (for crystalline silicon solar cells）

The BS-500BK is the Photodiode detector which is calibrated by the solar simulatator whose light intensity is calibrated by the secondary reference crystalline silicon solar cell.

The BS-500BK show the similar spectral response to those shown by the monocrystal and polycrystal silicon wafer.

Catalog（PDF）

Features

• The BS-500BK can be used to adjust the light intensity of the solar simulators that evaluate the output of crystalline solar cells.

• The crystalline solar cells show the sensitivity in the wide wavelength range.The BS-500BK shows the similar spectral response to those of the monocrystal and polycrystal wafers.

• The current value in 1SUN is described on each of BS-500BK detector.

• The spectral response data for each BS-500BK can be offered optionally.

Data for EQE of BS-500BK

How to use BS-500BK

1. Turn on the light of the solar simulator.
2. Place the BS-500BK detector to the irradiation area.
3. Set the alligator clips on the pins of the BS-500BK and then connect the cables to the circuit tester.
4. Check the value of the output current of the BS-500BK
5. Adjust the irrdiation intensity of the solar simulator to the current value described on the BS-500BK detector.

Standard configuretions

●BS-500BK Si Photodiode detecotor　
●Testing

Related Product